1 / 8
3030 Extrusion Gimbal mount for Zesty Nimble for a Hypercube Evolution — zdjęcie 1
1 / 8

3030 Extrusion Gimbal mount for Zesty Nimble for a Hypercube Evolution

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a re-designed gimbal mount for the Zesty Nimble. As the original mount by slonolod was designed to mount on a…

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
224
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a re-designed gimbal mount for the Zesty Nimble. As the original mount by slonolod was designed to mount on a delta printer, I had to re-design the parts to fit on a 3030 aluminium extrusion frame of my Hypercube evolution.
I added a "tilt stop" that prevents falling over of the stepper motor (especially if you use a pancake stepper as I do)

Things you need:

  • 2 x 683 Bearing
  • 2 x M3 Lock Nuts
  • 2 x M3 washers DIN 125
  • 2 x M3 washers DIN 433 (very small O.D. to fit into the bearings)
  • 4 x M5 x 10 screws
  • 4 x M5 Nuts
  • 2 x M3 x 20 screws
  • Screws to mount everything to the frame. If you have any ideas to improve the nimble, just leave a comment and I'll try my best :-)

    Print Settings

Printer:

Hypercube Evolution

Rafts:

No

Supports:

No

Resolution:

0,2 mm

Infill:

40 %

Category: 3D Printer Parts

Tagi