Octogonal Restrictor Gate for Hori Hayabusa joystick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Octagonal Restrictor Gate for Hori Hayabusa joystick (used in the Hori RAP4 for example) designed as a drop-in…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 304
- Wydruki
- 0
- Wyświetlenia
- 1857
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Octagonal Restrictor Gate for Hori Hayabusa joystick (used in the Hori RAP4 for example) designed as a drop-in replacement for the stock square gate.
Important: I modelled the pins of the original gate but actually didn't print them to avoid the need for supports (or a bulkier piece) and it works well. Just move the piece 3mm (the length of the pins) below your print bed to skip them.
I guess you could save some print time by making it smaller, but I decided to stay close to the original design.
Print instructions
Category: Video Games Print Settings
Printer: CR-10 Mini
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Notes:
Make sure to skip the pins if you want to print without supports.