1 / 21
Vinyl LP Wall Mount for single/double LPs - No Supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vinyl wall mount for single or double LPs
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
Vinyl wall mount for single or double LPs
Couldn't find anything that would need my specific needs so i built one from scratch.
- This is a no-support print, if you position them like in the Bambulab studio screenshot.
- The main part can be printed laid down or standing with no supports
- if you decide to move the around or rotate them you might need supports.
- Fits LPs with envelopes up to 320mm wide and 10mm thick
- Tapered holes on front and back for easy mounting with screws
- No tools needed for the main parts assembly
- Tapered main body that allows you to pull the LP out at an angle in case of grid of multiple LPs.
- Easy push/pull from the bottom also.
- They won't fall in any case.
- Can be mounted on angled walls
- For a double LP use without the 5mm spacers
- For single LPs the 5mm spacers keep the LP flush to the front for better aspect.
3D printing settings
Feel free to print with whatever material you want there is no limitation.
Printed with Bambulab P1P - 0.28mm Extra Draft @BBL P1P
- PLA Basic
- layer height 0.28 mm
- initial layer height 0.2 mm
- wall loops 2
- infill 15%
- no supports