Mellow Fly ADXL345 accelerometer mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic M3 mount for mellow fly ADXL345
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Mount made for Originally for Artillery Genius Pro but it should fit any other printer, it uses M3 screw to hold it in place.
No need for nuts for the sensor, the screw will tap itself when installed.
It's a little thick 6.4mm because the smallest screw I have is 6mm long.
I created a 4.4mm version if you want to use it too.
In Klipper which axis corresponds to which can be changed using "axes_map" variable in the configuration file.
In my case it is "axes_map: y,z,x"
Make sure to enable “Precise Z Height” Option if you are using Orca Slicer (or whatever equivelent is in your slicer) Or you can use "Variable Layer Height"