1 / 2
Festool or Tanos Systainer Organizer Small Parts Containers — zdjęcie 1
1 / 2

Festool or Tanos Systainer Organizer Small Parts Containers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small lidded boxes that fit inside Systainer3 Organizer bins. Also useful for sorting and organizing small items.

Ocena
0 / 5
Polubienia
20
Pobrania
86
Wydruki
0
Wyświetlenia
817
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

Don't we all need small boxes to fit into larger boxes, that fit into even larger ones?  These are small, hinged containers that fit into 50mm Systainer3 organizer inserts.  They save some room for very small or infrequently used parts.  7 of the 12.5mm boxes fit within a typical 50x100 Festool or Tanos insert bin.

These may also be useful by themselves for small part or accessory organization, as they are more efficient than round bottles, pill bottles, or even small zip lock bags.

5 sizes posted for now: Download both the “bin” and “lid” for each size. I can add more upon request or as I make different sizes for myself:

  • 7.5 mm
  • 10 mm
  • 12.5 mm
  • 15 mm
  • 17 mm

I used 1.75mm filament for the hinges and melted the outsides of them in place with a soldering iron.

Note: If you print with PLA, the hinge holes might be just slightly loose (not tested). If you print with PETG, you will need to do some post-processing of the holes.  I printed with clear PETG. The best layer height I found for the combination of transparency and detail was .25 mm.  If you print a lower detail height you likely won't have as much transparency. If higher, you'll likely have more post-processing for the hinge holes.  I used Overture clear/transparent PETG for mine.  I used a 1.75 mm drill bit to clean out the holes.

Tagi