1 / 2
Samsung Galaxy S24+ (plus) Voronoi case v2 - Handyhuelle Smartphone — zdjęcie 1
1 / 2

Samsung Galaxy S24+ (plus) Voronoi case v2 - Handyhuelle Smartphone

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is my second Samsung Galaxy S24+ (plus) now version 2 with nice voronoi pattern.

Ocena
0 / 5
Polubienia
13
Pobrania
303
Wydruki
0
Wyświetlenia
1124
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is my second Samsung Galaxy S24+ (plus) Voronoi - case version 2.

No support is required in the slicer settings :-)

The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on material and printer.

I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Version 1 --> https://www.printables.com/de/model/976494
and new Halloween version 3 --> https://www.printables.com/model/1010794

If you like it, I'd be happy about a “Like” or a 5-star rating.

Happy Printing
Toni :-)

----------------------------------------------------------------------------------------------------------------

Dies ist meine zweite Samsung Galaxy S24+ (Plus) Voronoi - Hülle Version 2.

In den Slicer Einstellungen ist keine Unterstützung erforderlich :-)

Die grünen Teile im Bild dienen lediglich als Stützen zum einfachen Drucken und müssen anschließend entfernt werden. Das Entfernen kann je nach Material und Drucker einfach oder schwierig sein.

Ich benutzte Filament TPU härte 95A und Slicer Temperaturen -> Düse: 220 °C, Bed: 50 °C. Für einen guten TPU-Druck sollte das Filament trocken sein.

Siehe auch Version 1 --> https://www.printables.com/de/model/976494
und neue Halloween Version 3 --> https://www.printables.com/model/1010794

Wenn es dir gefällt, freue ich mich über ein “Like” oder eine 5-Sterne Bewertung.

Viel Spaß beim Drucken
Toni :-)

Tagi