Portal Weighted Companion Cube with Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A truly Weighted Companion Cube
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
A truly Weighted Companion cube from the game Portal and Portal 2.
Printed using a Prusa MMU3 and an Original Prusa MK3.5, 0.4mm nozzle, Overture PLA
Filament 1 - White
Filament 2 - Grey
Filament 3 - Pink
There are voids inside the model and a stop at an appropriate place so you can add ballast to make the cube weighted. Use any ballast you like, but the voids are the diameter of a US 1-cent coin. If you use US coins, it takes about 110-115 to fill the cube voids. Be cautious about overfilling the voids, as the coins' cool metal and oxidized surface may cause your filament to curl and create some issues. The print stops before the top of the void, so you will have some space above the coins to make it a normal bridge if you accept the provided stop. Do not let the ballast protrude above the print at the stop, or your nozzle may strike the ballast.
With the provided settings, there is some scarring from the supports on the bottom surface, but the supports should be removable with some effort.
This is a remix. I'm unsure where I got the original STL file, but I will update the listing when I determine the original creator.