ESR HaloLock 3-in-1 Watch Standoff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A little stand to support your watch on the ESR HaloLock
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- GNU General Public License v3.0
This is just a trivial model to add a standoff for your Apple Watch on the ESR HaloLock 3-in-1 charger. As designed, your watch should be supported by the magsafe magnets, but in practice I apparently tend to knock my watch off the puck in the middle of the night and wake up to an un-charged watch. This provides a little ledge to support your watch.
Two STL files are provided - one for PLA or other rigid filaments, one for TPU or other flexible filaments. I prefer the flexible model since it stays on the watch charger puck through a slightly undersized opening, making it easier to line up on the charger base. But they both perform the same function if you don't have flexible filament.
SCAD file included if you have other ideas, or if it doesn't quite fit for you.