Print optimized - Second PolyDryer Desiccant Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Some changes to make it more print friendly
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 348
- Wydruki
- 4
- Wyświetlenia
- 1852
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed the https://www.printables.com/model/941851-second-desiccant-container-for-polymaker-polydryer since it was a bit rough to print. The circles were taking up a lot of time and the support for the upper overhang wasn't nice to have.
I've removed some overhangs on the inside (so you can print it without supports) and removed the circles, replaced them with squares. The squares are 1.5mm, so smaller desiccant which is often mixed as 2mm-5mm balls shouldn’t pass through so easily.
Grab the lid from the original design, the fitment for that isn't changed.