Lian Li O11 Dynamic Extractor Fan - 2x 80mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lian Li O11 Dynamic case dual 80mm Extractor fans. This is for the specific case
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Decided to print a bracket that can fit into my Lian Li O11 Dynamic case. Wanted to add 80mm fans to the back of the case to help with heat removal especially behind my vertical mounted graphics card where I hound a hot spot of air building up.
I used 2x 80mm Coolermaster Sicklflow 80 fans connected directly to the MB PWN connectors
Hole on the top fan is to feed your PWM connector though if you want the cable routed down rather then up
Decision Making
- Top fan is flush to fit behind the AIO cooler
- Bottom fan is angled 22.5 degrees down to suck air from the Vertical mounted GPU
Printed on Bambu P1P
- PETG - 270'C
- Supports - Tree Auto Base plate only
Photos to follow when I am done printing and mounting it (Might need small adjustments)