1 / 5
Minimalistic (Pencil) Case - no supports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
170mm*85mm*27mm - scalable in 1 axis - no supports - no hardware
- Ocena
- 4,5 / 5
- Polubienia
- 213
- Pobrania
- 488
- Wydruki
- 3
- Wyświetlenia
- 4435
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 13)Remiksy (0)Kolekcje (250)Powiązane
Attach lid with 1.75mm filament (I used a small section of polycarbonate filament)
170mm*85mm*27mm
Scalable
Diameter of the hinge is larger on the top shell, allowing it to open more freely
Designed to fit the casio fx-991EX, but will fit most other calculators
PRINT WITH PETG OR ABS - PLA WILL SNAP EASILY



Avoid having a seam inside (or near) the hinge.
The filament may need to be pushed in with a little bit of force. In extreme circumstances, use pliers to push the filament in.
Print the test assembly first