Moulin Roty / Trousselier handle enlarger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our Trousselier's handle was too small to operate easily. So I designed a handle that could be slid onto the original.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Our Trousselier's handle was too small to operate easily. So I designed a handle that could be slid onto the original one, making it higher and longer. It is not too large as to hinder the placement of the Trousslier onto a flat surface. You might need to play with the tolerances or directly glue it in place. I realised that it was not holding as well on other Trousseliers.
Also: make sure it is out of reach of your children if not glued in place.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
**Rafts:**
No
Supports:
No
**Resolution:**
0.2
Infill:
15%
**Filament:** Polymaker PLA silk bleu sarcelle
Notes:
The part is quite small and is not optimal to be printed in the final orientation. However, if some filament pieces are hanging, you can easily snip them. It is not perfect, but it does the job.
Category: Replacement Parts