Invisible zipper foot for Husqvarna (1980's)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed an invisible zipper foot for my old Husqvarna, but could not find one online, so I modeled it.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed an invisible zipper foot for my old Husqvarna. Since I could not find one I designed the plastic part myself and stole one of the pins of the other feet from the machine. Those can be slid out from the side. I don't think that you could 3D print that part as it likely won't hold. If you find some alternative metallic parts that could be used for it, I would be interested.
I tried several spacing on the bottom of the sewing foot. This was the one that worked best for my zipper and machine.
Let me know your thoughts!