Stackable Boxes 6 v2 (6 Inch / 150mm Depth)

This is the version 2 of my stackable box (SB) system. In order to use the lids, hinged lids and dividers with the stackable boxes, you will need this version 2 system, as they will not fit on the version 1 system.

These boxes come in various widths: 2 inches (50mm) / 4 inches (100mm) / 6 inches (150mm) and 8 inches (200mm).

There are also 3 types available:
Standard (S) - 2" (50mm), 4" (100mm), 6" (150mm), 8" (200mm) widths
Nameplate (NP2) 0.5"x2" (13mmx50mm) - 2" (50mm), 4" (100mm), 6" (150mm), 8" (200mm) widths
Nameplate (NP4) 0.5"x4" (13mmx100mm) - 4" (100mm), 6" (150mm), 8" (200mm) widths

These boxes are only stackable on the same size (For example: a 2" will not stack on a 4" - But: a 2" will stack on a 2", a 4" on a 4", a 6" on a 6" and an 8" on an 8" Please Note: The depths have to be the same too - use the colour matching below).

The boxes are colour coded - Green for 2" depth / Red for 4" depth / Yellow for 6" Depth and Blue for 8" Depth.

I have also included a set of 3 clips (2" left to 4"+ right boxes / 4"+ left to 2" right boxes / 4"+ left to 4"+ right boxes). These fit in the base of the box to join 2 boxes together. By adding more clips, you can create a string of boxes.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer 5.7.2 (Other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.2

Nozzle: 0.4mm

Print Speed: 80mm/s (First layer @ 50mm/s)

Nozzle Temperature: 210 Degrees

Bed Temperature: 65 Degrees

Infill: 10%

Supports: No

Skirt: Yes / Optional

Brim: No / Optional

Raft: No 

Enjoy.

                                      https://www.buymeacoffee.com/tigertone