Venom Pro Adder Muzzle Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Muzzle adapter uses original hardware from the Vemon pro blaster. Increasing battery tray to 115mm x 22mm.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 723
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Muzzle adapter uses original hardware from the Vemon pro blaster. Muzzle cap is glued onto the front. I suggest etching the mating surface before gluing. Prethread the thumb screw into the lid and make sure it does not have alot of turning resistance. Once the cap has cured install the new muzzle onto the blaster. The lid tabs may be rough after printing. Smoothing the layer lines and removing and installing the lid repeatedly will make the parts wear into each other. ****NOTE: If you use a bigger battery the lid can be removed for charging only. the muzzle will have to be unscrewed to swap batteries. DO NOT charge battery with it plugged up to the blaster. ENJOY!!! Message me if you have any questions. BATTERY TRAY BAFFLE AVAILABLE HERE: https://www.printables.com/model/985287-battery-tray-baffle