1 / 5
Desk Mounted iPad Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quite specific iPad holder that slides onto the back part of my desk will fit desks 13 to 15.5mm.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 429
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This model is an iPad stand I made specifically for the back of my desk but I hope someone out there with the same situation as me can find this useful. It was made to fit my 15mm thick desk but will probably fit up to 15.5 and I wouldn't go much lower than 10 or 12mm. It could also be very easily modified to be free-standing or fit a different-size desk so good luck!
