1 / 3
P3Steel V4 & V4.2 Y Rod Holder — zdjęcie 1
1 / 3

P3Steel V4 & V4.2 Y Rod Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a small Clip that Holds the Y Rods in place and prevents them sliding back and forth.

Ocena
0 / 5
Polubienia
0
Pobrania
25
Wydruki
0
Wyświetlenia
313
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a small Clip that Holds the Y Rods in place and prevents them sliding back and forth.

PETG or ABS recommend

Print them hot and with 100% infill,
0.4 nozzle @ 0.48 extrusion width = 1,5mm / 3 outlines/Perimetershells
Solid top and bottom layers = 1mm / 10 layers

Print instructions

Category: 3D Printer Parts Print Settings

Rafts: Doesn't Matter
Supports: No
Resolution: 0.2
Infill: 100%

Notes:
Print it really hot for good layer adhesion.

Tagi