Compartment for Clas Ohlson storage organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional small compartment for the storage organizer case sold by Clas Ohlson. Product number: 40-6978
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
The case came with just a few small compartments. As I use one of these for small electronics I needed more of the smallest case. This is for the size 45x45 mm, but the actual size of the box is a bit different. Bottom is 45x45mm and the top is 47x47 mm. Total height with legs is 52 mm.
The image with two boxes has the original box on the left, and this model on the right.
Printing instructions:
Should be printed with supports due to the small legs.
The model in the picture is printed on a Bambu P1S with:
- Filament: Bambu PLA Basic
- Infill: 15%, Gyroid
- Supports: Yes
- Adhesion: No
—
Disclaimer: I am new to 3D-modelling and the model is not perfect. Please let me know if you have suggestions for improvements or something that is done wrong.
If you wish to use the model without attribution - Please contact me and we'll discuss.