Nuc 11 (NUC11TNKi5) Bottom Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom mounting plate for NUC 11 (NUC11TNKi5)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I bought a second hand NUC 11 (NUC11TNKi5) on ebay but it was missing the bottom plate so I got a great deal. A bit of measuring and a 1hr print later and it looks as good as new! I added some little rubber feet to ensure the bottom gets a bit of airflow (not sure what the original cover looked like but extra air can't hurt, right?
I don't know the measurement of the M2.5 screws needed off the top of my head but I believe they were around 10 or 12 mm. I don't imagine anyone else is going to need this part but if you you are printing this and need the M2.5 screw length, comment and I'll pull out my calipers and measure them :)