Star Trek: Nemesis Tricorder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is the tricorder seen in Star Trek: Nemesis
- Ocena
- 5 / 5
- Polubienia
- 177
- Pobrania
- 819
- Wydruki
- 7
- Wyświetlenia
- 3547
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Here's my version of the tricorder prop seen in Star Trek: Nemesis. It was a fairly simple prop design that featured a large LCD display screen and a flip-up sensor lid.
The lid uses a 6x2mm magnet to hold it closed.
To connect the lid to the body, insert its arms into the slots then insert the hinge pins into the rectangular holes and slide them outward until secure. **Each pin fits only one side so you will need to match them up. The key plate then covers the rectangular holes.
Use supports for the grips (print them standing up for best results) and the side button.
The tiny LED part used color swapping to get the white and red.
Includes display stand and decal graphics as pdf docs that should print correct size. Will try to add a medical version some day.
Update October 1, 2026 - Added version of body top and flip top with cutouts to help place the stickers.
Buy prints of this model:
max3dfactory (German region) - https://www.ebay.de/usr/max3dfactory