Resized Refill Filament Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Resized it to fit the Refills from Recycling Fabrik and added a bigger brim so the Filament doesn't fall off.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 1
- Wyświetlenia
- 134
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a spool that could handle the vibration during printing and unwinding on an ais during printing without separating itself. Had that once and the Filament got stuck in-between the halfes of the spool.
So I found the Filament spool by kubik241 that was very similar to the one I imagined - a stable core that has two tight screwable sides. Just a little resizing and a bigger brim to fit the refills I'm using and it's perfect.
Sharing it here if someone needs something like this one too.