Tall Boy Dual HEPA Housing for BentoBox V2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A taller, dual filter housing for the BentoBox 2.0 that fits in BambuLab printers.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 202
- Wydruki
- 2
- Wyświetlenia
- 1059
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to see if I could rethink the HEPA module on the BentoBox to improve filtration performance inside of a BambuLab X1C. This is what I came up with.
I have no means of scientifically testing this… But, in theory:
-Dual filters reduce flow resistance, increasing flow rate through the BentoBox and possibly extending fan life.
-Doubling the inlet area draws air from a larger volume inside the printer.
-Raising the intake draws air closer to the source of the fumes, the print head.
Like my work? Donate at https://buymeacoffee.com/nc_fabrikation to help me buy filament for future designs!