1 / 8
Portable 17" laptop display enclosure (HP DV7 N17306 -L02) — zdjęcie 1
1 / 8

Portable 17" laptop display enclosure (HP DV7 N17306 -L02)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an enclosure for a 17" HP Pavillion DV7 (2011) Display. Display part number: N17306

Ocena
0 / 5
Polubienia
19
Pobrania
43
Wydruki
0
Wyświetlenia
553
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is an enclosure for a 17" HP Pavillion DV7 (2011) Display. Display part number: N17306 -L02

IMPORTANT NOTE: The display can be rotated max to 30 degrees, after that the cable disconnects. I'm planning to work on a rev2 that supports the full 180 degrees movement having some kind of strain relief for the cable.

The assembly consists of an housing for the controller divided into three parts (one for the controller, the others two need to be glued together - using four aligment pins - to make the box) and a frame for the display divided into four parts which snaps to the display and are glued together - using four alignment pins. These two parts are then assembled by two screws that double as hinges.

Hardware needed for assembly: 

Hinges:

  • 2x 24mm M4 bolts
  • 2x M4 nuts Controller 

Housing:

  • 4x M3 10mm bolts
  • 4x M3 heated inserts