Modern Minimalist Designer Pot

I wanted a modern, minimalist pot with a unique design.  After looking around online I found it difficult to find something that called my attention, so I decided to design something for myself.  I wanted drain holes and a drain dish to keep water off my floor.  I have a pothos plant and decided on a design with large holes to accentuate the way the vines grow and overtake what's around them.  The circles and curves give give it a nice zen like feel.  It looks just as good on a shelf as it does hanging.  The drain dish easily snaps in place and no supports are needed to print.  The drain dish also has vent holes to allow water to evaporate between waterings. The holes to hang the rope are 6mm in diameter which fit my 7/32 inch wide paracord rope that I used to hang it.  Something smaller in diameter should also work.  7/32 inch is the max size you want for the diameter of rope.

I printed mine using a multi-color print with both white & wood PLA at a .2 mm layer height . The drain dish was printed in wood PLA.  No supports are needed.  I used my Bambu X1C and changed colors from white to wood at layer 401, then back to white from wood at layer 607.  It took about 11hrs to print the pot and 3.5 hrs to print the drain dish.  About 400 grams of filament used. Enjoy the pot and feel free to post some makes.