3xAAA Battery Box Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily add 4.5v AAA battery power to your project with this copy-pasteable DIY component
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Also check out my 2xAA battery module: https://www.printables.com/model/984657-2xaa-battery-box-module
This is a reusable battery module component I designed to be copied and pasted into my projects. There's two parts here: the shell itself, and the two contact pads. Wrap some bare wire around the cut-out notches in the contact pads to make an electrical connection with the batteries, then slide the contact pads into the slots in the shell to assemble.
The external dimensions of the module, including batteries, are (in millimeters:) 35x60x12.625
This is the same footprint as my AA module - meaning that the two can be swapped depending on your needs without changing the overall design.