Print in Place nameplate with folding hinge stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
print in place, customizable nameplate with folding stand.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
this is a simple nameplate I designed that can be easily customized with any information directly from your slicer. the model should be printed flat down, no supports needed. it has a foldable stand with a print-in-place hinge. the hinge is made with tight tolerances to hold its place, however after some time it may get loose. I'm currently working on a better design, but any tips or help is appreciated.
Print settings
Material: used PLA for mine, might work with pets, but not sure
temp: 209C (why so specific u ask? not sure its just the exact temp for decent place prints on my printer)
supports: none
would love to see your makes so please post them below.
If you found any of my models helpful or nice, consider leaving a tip?