1 / 2
DF64 Stronger Blind Shaker Stand for MHW-3Bomber Blind Shaker — zdjęcie 1
1 / 2

DF64 Stronger Blind Shaker Stand for MHW-3Bomber Blind Shaker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed this blind shaker holder to fit my MHW-3Bomber Blind shaker

Ocena
5 / 5
Polubienia
17
Pobrania
305
Wydruki
2
Wyświetlenia
1992
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My MHW-3Bomber Blind Shaker had a little larger of an outer radius, so I just remixed this to fit my blind shaker.  Bonus is that when it's grinding, the vibration on my machine causes the blind shaker to spin, so the grinds end up nicely distributed

Parameters:

0.4 Nozzle
0.2 Layer Height (Recommend 0.1 for the tapered version at least for the layers where the shaker sits)
4 Wall Layers (minimum)
5 Top / Bottom layers
15% - 25% Infill

*10mm x 3mm Magnet is optional as the shaker is held in place by the grove and will not move but magnets are satisfying so the hole is there for one if you choose to use it. 

Tagi