Neopixel LED Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diffuser tube with neopixel stripes. 4 pin connector, can be connected in series or parallel. For hanging or standing.
- Ocena
- 0 / 5
- Polubienia
- 56
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1223
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Since such LED tubes are very expensive to purchase, I decided to build some myself. I used 40mm opal diffusers (Link: https://www.barcelonaled.com/de/led-streifen/alu-profile-fuer-led-streifen/zubehoer-fuer-profile/runder-opal-diffusor-o402mm-bperft40.html?srsltid=AfmBOoo1yvo6cJnEGMAEOvaYC-0-6XlpEu5RBt31cOUYh3UHz4CMameU ), I also 3D printed the corresponding rails because it was cheaper. There are WS2812b LED strips with 60Leds/m in the tubes (there are no hotspots visible). The connection is made via a GX16 4 pin connector. Optionally, tripods can be printed to stand up, I hung up my tubes. I control the tubes with an Arduino via WLED or DMX.
25mm M3 screws are required.