1 / 4
Volador VX3.5 1604 Motor Guards (plus .dwg file for the arms) — zdjęcie 1
1 / 4

Volador VX3.5 1604 Motor Guards (plus .dwg file for the arms)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1604 Motor Guards for the Volador vx3.5

Ocena
0 / 5
Polubienia
16
Pobrania
157
Wydruki
0
Wyświetlenia
1052
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

Just modelled these to help protect my VX3.5 motors since I often times would crash in a way that would bend the bell on motor. I have not yet fully tested this designs performance in the air so please keep that in mind. 
 

You will need a decently performing printer that can handle bridges well with TPU, I would not recommend making these with anything other than TPU. You will have to poke a hole into the bottom to allow the screw to work (shown in the fourth photo). The difference between the V3 and V4 is the thickness of this membrane, .4mm and .8mm respectively. 

If you have any questions please DM me on Discord-Zelas

Tagi