1 / 2
Soap/Shampoo/Conditioner Liquid Bottle — zdjęcie 1
1 / 2

Soap/Shampoo/Conditioner Liquid Bottle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Flexible bottle for liquid soap, shampoo, or conditioner.

Ocena
0 / 5
Polubienia
10
Pobrania
60
Wydruki
1
Wyświetlenia
396
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution

A travel bottle for when you need liquid soap, shampoo, or conditioner on a trip.

 

Printing: 

  • All printed with default 0.2 mm settings except where indicated below:
  • Bottle:
    • TPU
    • Any infill %
    • For best results, enable Ironing
  • Cap Part 1:
    • PETG (PLA is not waterproof, but you could try)
    • For best results, print on smooth bed (with glue)
    • 100% Infill (for me, water snuck into the inside and leaked out the top face somehow)
  • Cap Part 2:
    • TPU
    • Any infill %
  • Gasket: (optional, may help with seal)
    • TPU
    • For best results, print on smooth bed (with glue)
    • Any infill %
    • For best results, enable Ironing
  • Handle Ring: (optional)
    • TPU (PETG or PLA may work)
    • Any infill %

 

Assembly: (should be straightforward)

  • Slot the two Cap pieces together
  • Fill with some liquid
  • Insert gasket (optional)
  • Put on Handle Ring
  • Screw on Cap

 

I tried my best to make this one truly watertight. For me, it doesn't leak unless I squeeze it decently hard with the cap closed. Your results may vary.

Tagi