Parametric UniFi Protect G5 PTZ Corner Extension Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner extension mount with integrated ethernet cable tunnel and bird deterrence filament slots.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 1335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
I was considering the best method to mount my G5 PTZ for ~280° of panning FOR under a corner overhang.

From the photo you can see I needed to stay as far out of the corner to account for the downspout.
None of the UniFi mounts offer the ability to extend out from a wall, especially on a corner. I was considering a pendant mount adapter along with a third-party pendant mount (i.e. mounting plate and ~1 ft piece of 3/4” threaded conduit) right under where the green arrow points.
Then I remembered I have a 3D printer!
Solution
Design and print a corner extension mount to achieve the following objectives:
- Securely mount to a corner
- Extend as far out as my printer bed will fit
- Fully parametric providing customization of all dimensions including the exact angle of the corner in case it is not exactly 90°
- Reuse the included wall mount with minimal additional parts required
- (2) M4 screws (I think I used 12 mm screws, but I left plenty of depth open for up to ~50 mm long screws)
- (2) M4 nuts (measure these carefully and adjust the integrated nut recess with enough tolerance to insert mid-print)
- (2) M4 washers
- (Optional) Integrated tunnel for ethernet cable
- (Optional) Slots for insertion of short pieces of filament to serve as bird deterrence. I super glued some clear pieces of PETG.
Customization
The Fusion file is included.
You can customize the parameters (DESIGN | SOLID | MODIFY | Change Parameters) to suit your objectives. The most common parameters you should need are Favorited. The non‑favorited parameters should work as well but may require more tinkering to repair broken downstream features. Tolerances are included inline in (). Adjust as needed. ArmLength is the total length of the extension mount itself. The inside of the corner to the end will be ~30 mm shorter. Definitely measure and adjust both Screw diameters so that you do not tear into the mount with your metal screws risking failure later.

I designed and prototyped on a Prusa MK4.
Let me know (Messenger | Printables.com) if you have any questions.
Printing
See the attached .3mf for my settings. I printed it in Prusament PETG and spray painted afterwards (no white filament on hand). Do not forget to pause the print to insert the nuts just before the recess is enclosed. I designed a default 1 mm buffer to the height of the nut recess to ensure no interference between the nut and the print head.
Installation
I think it is self-explanatory but let me know if you have any questions.
Shameless Plug
If this model helped you solve a problem, save some time, or in any way made your life a little easier then please consider clicking the Like button and posting your Makes! If it fell short after clicking on the title of the model, please let me know (Messenger | Printables.com). Either way, Thank you!