Elliptical MMU feedthrough for Prusa enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part allows you to feed tubes from the outside into the interior of the Prusa enclosure to connect to the MMU.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I had uploaded a feedthrough for the MMU previously, which consisted of two parts.
https://www.printables.com/model/538335-mmu2-tube-feeder-for-the-prusa-enclosure-with-hone
Since I was upgrading to the MMU3 I decided to take another look at this part. I decided to make it one piece and opted for an elliptical design.
It can be tricky to print as there are some overhangs and bridges. So make sure you have good cooling. It can be printed without supports, but I found using an organic support helped a lot with the aesthetics.
I also tried to print it multi-material using the no-sparse-layers wipe tower but ran into some issues if the filament failed to load. It went into crash detection and kept ramming into the print. Apparently, if you disable crash detection it will work. But I didn't want to risk it again as it failed close to the end.
Crash detection is found in the settings section on the actual printer.
Just wanted to add this incase anyone else tries this.
Things needed to be done prior to installation:
You will need to do the Hinge lid upgrade:
https://www.printables.com/model/273426-hinged-lid-for-adding-mmu2s-to-original-prusa-encl/files
You will need to purchase the tube connectors: https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20