Self watering planter "currently unnamed"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A medium self-watering pot which I call "currrently unnamed". The diameter is about 135m. More slim and tall than wide
- Ocena
- 1 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 191
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
currently unnamed 😉
A medium self watering planter with a diameter about 135mm. The body is more slim and tall than wide
It is simple to print. You need support only for the cap and floating body. The floating body has to be filled up with styrofoam.
Reduce you print speed and print the outer pott with at least 5 walls to avoide leakage. Otherwise you can use a thin layer epoxy resin to tight it up.
Used filament: Sunlu PETG
If you like the planter you can support me by watching the video (german):
Let me know if you have a funny name for this pot.