3D Printed Snow Tires For 1/10 Scale RC Car (12mm hex)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable snow tires for any 1/10 scale car with 12mm hex on the wheel mounts.
- Ocena
- 5 / 5
- Polubienia
- 96
- Pobrania
- 530
- Wydruki
- 1
- Wyświetlenia
- 2346
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
3D printable snow tires forany 1/10 scale car with 12mm hex on the wheel mounts. (and enoght clearance for the big wheels 110mm)
I put them on my cheap nitro buggy and it worked great... at least when the snow wasn't that deep. In deep snow it didn't have enough power to keep itself qoing.
Check out the video to see them in action: https://www.youtube.com/watch?v=N8hnGQbgvMM
Printed with a 1mm nozzle for fast print times (under an hour each)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.6
Infill:
100%
Filament:
esun and hobbyking PLA
Notes:
Printed with a 1mm nozzle for fast print times (under an hour each)