B&D dustbuster charging base wall holder and pressure plate to charge Dustbuster while on wall hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No room to charge your B&D Dustbuster? Want to charge your Dustbuster while it is wall mounted? Here's my solution.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I keep a Black and Decker Dustbuster in my 3D printer room, which is shared with 2 cats and 1 wife. These designs allowed me to store the charger and also charge it while hanging on the wall.
I used PETG, but PLA should be OK too.
I mounted the pressure plate with #10 pan head sheet metal screws into wood. Do not tighten the screws so it can be moved up when not charging and down when charging.
Used this wall hanger for the Dustbuster. I did not design this piece. https://www.thingiverse.com/thing:4769891