Pull-String Gingerbread Man (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple print in place gingerbread cookie man, string required :) "Perníček"
- Ocena
- 5 / 5
- Polubienia
- 191
- Pobrania
- 585
- Wydruki
- 17
- Wyświetlenia
- 2585
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a print in place model of a moving gingerbread man. No glue required, only some string ! 🍭🍪
You can also try a more difficult little Elf or maybe the Nut Cracker. This Gingerbread man is the easiest one to print :)
You can do a color change in order to highlight it's frosting detail. You can also do an additional color change to highlight its mouth and buttons ! Or you can print it as it is and color it in.
I recommend using a “Hilbert curve” top layer pattern in order to get it cookie-like-look. But that is optional. Mine was printed using brown PLA from ZERO on my MK3S+.
Included G-Code includes 2 layer color changes at the top.
The little cookie heart can be printed separately and attached to the string.
