Xilo Phreakstyle XT60 Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xilo Phreakstyle XT60 Holder/MountI was in need for proper XT60 mounts, so I created these.They are designed to sit on…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- BSD License
Xilo Phreakstyle XT60 Holder/Mount
I was in need for proper XT60 mounts, so I created these. They are designed to sit on the middle standoffs next to the FC/stack.
Following models are available:
- 90deg XT60 Mount (vertical) -xt60_holder_90deg.stl
- 45deg XT60 Mount -xt60_holder_variable_deg.stl
- -45deg XT60 Mount (reversed) -xt60_holder_variable_deg_reversed.stl
- simple bracket (for symmetry) -simple_bracket.stl
- simple bracket with usb cutout -simple_usb_bracket.stl
Note: these XT60 mounts are designed for the left side, you can easily mirror them in your slicer to use them on the right side.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.2mm
Infill:
100%
Notes:
I recommend using only 1 Perimeter/Wall and you should increase the Infill/Perimeter Overlap to 45%, it makes the part more rigid and less flexible.
Thus less likely to wobble around while flying and preventing it from touching the FC/Stack.
Category: R/C Vehicles