MicroRAP 100 Alternate Hotend Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesigned hot end mount for the MicroRAP 100 that's loosely based on the Prusa i3 extruder. It uses the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a redesigned hot end mount for the MicroRAP 100 that's loosely based on the Prusa i3 extruder. It uses the much more common 5015 blower fan as a part cooler, and a 3010 fan (which normally comes with E3D V6 clones) to cool the hotend.
I have also included the step file for these parts for anyone who would like to make changes.
Required hardware:
- 6x M3x16mm screws
- 2x M3x30mm screws
- 1x M3x8mm screw
- 5x M3 Nuts
- 2x M4x25mm screws
- 2x M4 nuts
- E3D v6 Hot End
- 5015 12V Blower Fan
3010 12V Hot End Cooler Fan NOTES:
For the part "nozzle_fan.stl" be sure that the thin walls option is enabled in your slicer.Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2.5
No
Supports:
No
0.2
Category: 3D Printer Extruders