73' Porsche 914 Cupholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide-on cupholder that fits the center-console of a Porsche 914!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 1390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi 3D printing friends! This design is a cupholder that fits a Porsche 914 center-console but could essentially slide onto any vertical piece of material of similar thickness. It was designed to be removed easily in the event you want to take a drive without it :)
The majority of the print was PETG for the higher temperature resistance (i.e. sitting in the car and warm drinks) and the inner flexible parts were TPU (slide into place & help hold smaller drinks to keep them from spilling).
The TPU parts had the following settings:
- 0.4 mm nozzle
- 0.2 layer height
- 20% infill (gyroid)
- With Supports
- No raft or brim
The PETG parts had the following settings:
- 0.4 mm nozzle
- 0.2 layer height
- 30% infill (gyroid)
- No supports (printed cups facing upward and mounts facing downward)
- No raft or brim
UPDATE 8-15-22: Added a “Version 2” that has elongated oval weight cuts in the main cupholder, and joins the freestanding wall that was a bit weak which improves the overall strength/durability.