Pull-String Elf (print in place + assembly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple print in place Elf, no support, no MMU. String and GLUE required for assembly :) "kašpárek"
- Ocena
- 5 / 5
- Polubienia
- 129
- Pobrania
- 330
- Wydruki
- 6
- Wyświetlenia
- 1980
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a no support model of a moving Elf, also no MMU needed. Glue and some string required ! 🎄🎅
You can start with an easier Gingerbread Man or maybe the Nut Cracker. This Elf is a medium difficulty print :)
Can be printed in any combination of colors and then it all glues together easily with guide rail. Its shoes and gloves are not essential :)
Both the hat and the belt has a color change at a certain layer, but that is not required if you don't wish or you don't have another color.
Best glue order
- collar
- then top of the dress
- then belt
- then the bottom of the dress !
For both the gloves and the shoes, you can put a bit of glue on the end of its limbs and simply push it on and let the glue dry (try dry fit beforehand) !
The little horse ornament can be printed separately and attached to the string to pull.