PiFinder - Movable Screen !
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PiFinder Movable Screen! switch mode Left/Right/Flat in 1 min! Mounts Just like a regular finder - clears focusers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This enclosure for BBLabs PiFinder ( https://www.pifinder.io/ )
PiFinder is an Electronic Finder - it replaces encoders and uses accelerometer and camera to provide accurate position.
This Enclosure allows:
- Switching Left/Right/Flat Mode in about 1 minute
- Can be used basically in any position, since it can be freely rotated to have proper orientation
- Easy access to SD Card in any mode
- Integrated SugarPi Battery (also spacer for people that don't need it
- Can be used with imx296 and Raspberry pi HQ camera
YouTube Video with more info :
Printer: Prusa i3 MK3S+
Filament: Generic PETG
Nozzle 0.4mm
Use “Paint on Supports” and "Automatic Painting" for best results with Prusa Slicer.
Beside DIY Kit that can be purchased from PiFinder.io
List of parts used:
Electrical parts were sourced from Adafruit:
40-pin FPC to Straight 2x20 IDC Female Socket Header PID: 4905 ( This one plugs to Raspberry PI)
40-pin FPC to Straight 2x20 IDC Male Plug Header PID: 4904 (This one need to be soldered in to PiFinder Keyboard)
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long PID: 4933 I used 25cm version, but I would recommend shorter cable around 10cm would be perfect.
Listed bellow hardware is for information only. I have used these vendors but i DON'T endorse them in any way.
Hardware used:
Button Head Hex Hexagon Socket Allen Screw Bolt: M2.5 8mm, M2.5 12mm
Brass Hot Melt Insert Knurled Nut: M2.5 Outer Diam 4mm