Blade Fuse Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small holder for 4 standard blade fuses.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 1549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi 3D printing friends! This design is a TPU holder for 4 standard blade fuses. It is meant to hold some spare fuses and be mounted in a location of your choosing.
The TPU material, and sizes of the openings, means the fuses will fit snug and will not fall out even when mounted inverted. There are also TPU “Pins” that accompany this model that can be used to mount the holder if desired.
It can be used and mounted anywhere but it was specifically designed to be adapted to the following fuse box hole pattern:
https://www.jwestengineering.com/914-Fuse-Box-_p_16.html
The TPU parts had the following settings:
- 0.4 mm nozzle
- 0.2 layer height
- 3 perimeters
- 50% infill (gyroid)
- No supports (openings facing upward)
- No raft or brim