1 / 2
Rugged box remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a box to house my soldering iron and miscellaneous tools.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 111
- Wydruki
- 0
- Wyświetlenia
- 668
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
I needed this box to be able to transport my soldering iron and tools. This model from Whity helped make sure I had a snap fit enclosure.
I have printed this several times on the Prusa XL, but due to its overall length the corners were starting to lose adhesion to the build plate. I then had to add a raft to help with build plate adhesion.
- No supports needed
- I did 50% infill
- Printed with Overture ECO PLA (Midnight black)
- Used 3x40mm 304 SS dowel pins from Amazon