Putting Golf Trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Practice putting for the upcoming golfseason.With a return ramp if you miss the hole.
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 368
- Wydruki
- 0
- Wyświetlenia
- 1512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Practice putting for the upcoming golf season. With a return ramp if you miss the hole. I have made it in two pcs so it will fit smaller printers like my prusa. Glue it togheter after printing
Had to shrink the model to 88% in my slicer to make it fit my MK3S.
40x25 cm in full size
If something is wrong or you have any ideas for improvement, let me know.
Free to use, not for commercial purposes or financial gain.
Let me see your make ;)
I printed with 0.4 nozzle in PLA and used 0.2 quality in print settings.
Only support needed is for "the bridge" where you glue the two pieces togheter.
Happy golfing!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Doesn't Matter
Supports:
Yes
Quality
Infill:
10%
Category: Sport & Outdoors