The Godfather / Der Pate Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hueforge von dem Paten Hueforge of the Godfather
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
The STL is to big you have to scale it down.
If you want to resize, scale only x and y. Z must stay as it is
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 250x333.33mm in size
You may print at higher layer heights below the Min Depth of 1mm
The Max Depth is 2mm and the Actual Depth is 2mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #26 (1.16mm) swap to Jade White
At layer #35 (1.52mm) swap to Black
At layer #40 (1.72mm) swap to Red for the rest.
If you get the message with the floating regions when slicing... you can ignore this
If you get the message with the floating regions when slicing... you can ignore this
If you want to resize, scale only x and y. Z must stay as it is