1 / 5
Tape measure reel with a planetary gearbox for superfast winding
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tape measure reel with planetary gears to speed up the winding. Superglue needed, but no supports or ball bearings.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 444
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (7)Powiązane
Fits tape measure bands measuring 17mm by 1500mm (1.5m)
The gear ratio of the planetary gearbox is 1 to 3.8.
Only add glue to the blue surface (see photos) and the extra grip rings if you want to use them, the pins are press fit.
Printing:
Layer height: 0.28mm
Nozzle: 0.4mm
Print speed: 100-200mm/s.
Material: PLA
Supports: No supports
Adhesion: No brims, maybe a skirt to get the extruder going.