Volvo 240 Doorlatch trim pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Door latch trim pieces for the Volvo 200 Series. Different mounting style than OEM. Fits all 4 doors.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Hello! Please enjoy these free models of Volvo 240 doorlatch trim replacement parts!
This mounting Styles allows you to install the trim parts, without taking off the door panel. You'll have to maneuver the cutout of the trim piece around the doorlatch. It's possible you have to carefully pry the doorlatch towards you while sliding in the replacement trim piece until it reaches the cutout.
Mark your parts on the Bottomside with L/R after printing because the cutout in the trim piece is not symmetric and will only fit one side.
Once the trim piece sits flush against the door panel, simply stick the spacer into position. The spacer fits both driver and passenger side.
IF THE REPLACEMENT PIECE DOESNT FIT YOUR DOORPANEL TRY SCALING IT LARGER/ SMALLER IN YOUR PREFERRED SLICER. YOU WANT THIS FIT TO BE AS TIGHT AS POSSIBLE AS THERE IS NO SCREWS HOLDING THE TRIM PIECE IN PLACE!
I recommend using ABS or similar filaments. PLA will deform after only a couple hot days and lead to a bad fitment.
Slicer parts orientation example attached.
Let me know if you have any questions and Enjoy these files.