1 / 2
Eufy Spaceview baby monitor support for Snoo Bassinet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support for the eufy spaceview baby monitor camera to raise it up a bit and hold it on the snoo basinet.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 609
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Created a support for the eufy spaceview baby monitor camera to raise it up a bit and hold it on the snoo basinet.
Initially I printed this model (big thanks):
But I wanted something that can hold the camera a little higher (and easyer to print), so I redesined everything from scratch in cad. Added some thikness to the walls and redesigned the support so it does not tip from the higher altitude.
Notes
- it is a bit tight, would have been better to make the gap 1mm wider and add thiker support on bottom
How to print:
- designed to be printed flat
- use normal supports to support the camera clips
