The Witcher 3 Continent Map - Color - Huforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Witcher 3 Continent Map - Color - Huforge
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 730
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Loved the map Cyanidesugar created, but wanted to have the water blue and was unable to source the coffee color. This model is a large 12 piece print with an overall size of 800x573mm. The attached 3mf files are from Prusaslicer for a Prusa MK3s+ with an MMU3. The Overture Black and Sunlu White combine to make the blue for the water.
All the pieces use the same filament swaps to keep things easier and the blending matching. Instructions are below:
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA PolyLite Brown Transmission Distance: 0.8
PLA PolyTerra Wood Brown Transmission Distance: 0.3
PLA+ Sunlu White Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 2
Swap Instructions:
Start with Black
At layer #9 (0.48mm) swap to Brown
At layer #22 (1mm) swap to Wood Brown
At layer #24 (1.08mm) swap to White
At layer #27 (1.2mm) swap to Ivory White
At layer #30 (1.32mm) swap to Black
At layer #33 (1.44mm) swap to White for the rest.