Source Four Top Hat for LEDs (6.25in)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Standard sized Top Hat to use with Source Four LED's.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 466
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
Top Hat sized for (6.25in) Source 4 LED fixtures.
Most effective when the interior is lined with felt tape or flocked to reduce glare. Helps with excess light spillage and glare.
I recommend using black or matte black PLA/PETG to reduce part finishing.
WARNING:
Since these light modifiers are 3D Printed, some warping might occur based on heat generated from the fixture. Use at your own risk.
Print Instructions:
Print with ‘aligned’ seam position (aligned rear seam is usually best) and turn on ‘avoid crossing perimeters’. Prints great on Prusa Mini, MK3s, and XL with 0.25mm draft preset, 0.30mm draft preset, and 0.32 speed preset respectively.
Happy Printing!